This intake is the best choice for 400+ HP combinations that will be street/strip or full race with power bands that peak between 5500 and 6500 RPM. Performs equally well on the street as well as in competition, this single plane intake manifold makes power from idle to 6200 RPM out of the box and with a match port job this intake willrun to 7000 RPM. The runners are long and narrow to keep velocity up, and the last 2-3 inches of runner are straight to direct the air and fuel right at the valves. This means faster airflow and less fuel dropping out of the charge, which results in better throttle response and less low end power loss normally associated with single plane intake designs. In most cases, each runner is captable of flowing more air than the cylinder head can deliver, ensuring that the intake is not a restriction. This feature also allows for a stronger "draw" on the carburetor to fill the plentum more efficiently.
The S.P. Series intake manifolds have an open plenum. SP-1 Models fit ALL factory iron heads as well as TA's Aluminum Stage 1 and Stage 2 Street Eliminator Heads.
**SP-1 Series intake manifolds are 1-3/4" taller than stock**